Floating Dock Hardware

All your hardware needs for your floating dock. A. Inside Joist Corner - Used to mount stringers. B. Female "T" Connector - Use with all styles of male connector hinges. C. Chain Holder - Holds chain up to 1/2" to secure dock position. D. Pipe Holder - Side leg holder allows for level variations. E. Outside Corner - Use with backer plate or inside corners at outside ends. F. Male"T" Connector - Use with all styles of female connector hinges. G. Washer Plate - Used to prevent bolts pulling through. H. Corner Pipe Holder 3" Inside leg holder with slots for varying wood thickness. I. Inside Corner Connector Pin - Offers maximum strength when used with outside corner or connector hinge. J. HD Pin - Used to join male and female connectors. K. Male Corner Hinge - Use with all styles of female connector hinges. L. Female Corner Hinge - Use with all styles of male connector hinges.

Stationary Dock Hardware

All your hardware needs for your stationary dock. A. Plastic Leg Cap - Cover pipe ends for safety and a finished appearance. B. Corner Leg Brace Holder - Connect leg brace sets at corners for stability. C. Leg Brace Holder - Connect leg brace sets at leg pipes for stability. D. Backer Plate - Prevents bolts from working into wood and loosening. E. Joist Corner Bracket - Use to reinforce stringer joints. F. Corner Leg Holder - Use to mount leg pipes at inside corners of dock frame. G. Side Leg Holder - Use to mount leg pipes inside or outside of dock frame. H. Corner Plate - Mount at inside corners for increased strength. I. Anchor Tie-Down Corner - Use to secure dock in place, or to replace corner plate. J. Connector Hinge - Use to join dock sections or fixed ramps to docks. K. Base Plate - Use as a footing, or affix to another with a 2x6 for stability. L. 1/2" Pin - Use to join male and female connectors. M. 12" Bottom Pad - Use for soft bottom areas. Corners will grab for stability. N. Adjustable Leg Brace Set - Extends up to 72" between and stabilizes leg pipes.

Building & Maintaining Docks: How to Design, Build, Install & Care for Residential Docks

No Synopsis Available

Dock Edge Quick Release Dock Ladder

An excellent addition to any dock, these easy-to-climb Quick Release Ladders feature a quick release system which allows simple, tool-free ladder removal for storage and cleaning - just tilt the ladder up and slide it out of the attachment bracket. These sturdy ladders are manufactured with 1'' heavy wall anodized aluminum tubing to support tremendous amounts of weight, and are designed with 24-1/2'' high handrails, 4-3/4''D x 16''W steps with a modest distance of 10-1/2'' between steps to make climbing out of the water incredibly easy. These ladders have pre-drilled holes for permanent mounting. Stainless steel mounting hardware is included.

Dock Edge Quick Release Dock Ladder

An excellent addition to any dock, these easy-to-climb Quick Release Ladders feature a quick release system which allows simple, tool-free ladder removal for storage and cleaning - just tilt the ladder up and slide it out of the attachment bracket. These sturdy ladders are manufactured with 1'' heavy wall anodized aluminum tubing to support tremendous amounts of weight, and are designed with 24-1/2'' high handrails, 4-3/4''D x 16''W steps with a modest distance of 10-1/2'' between steps to make climbing out of the water incredibly easy. These ladders have pre-drilled holes for permanent mounting. Stainless steel mounting hardware is included.

Dock Edge Quick Release Dock Ladder

An excellent addition to any dock, these easy-to-climb Quick Release Ladders feature a quick release system which allows simple, tool-free ladder removal for storage and cleaning - just tilt the ladder up and slide it out of the attachment bracket. These sturdy ladders are manufactured with 1'' heavy wall anodized aluminum tubing to support tremendous amounts of weight, and are designed with 24-1/2'' high handrails, 4-3/4''D x 16''W steps with a modest distance of 10-1/2'' between steps to make climbing out of the water incredibly easy. These ladders have pre-drilled holes for permanent mounting. Stainless steel mounting hardware is included.

Dock Edge Cast Aluminum Dock Cleats

These sturdy cast aluminum dock cleats are sand blasted to provide a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength and durability. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. These cleats can be through bolted or lag bolted (bolts not included).

Dock Edge Cast Aluminum Dock Cleats

These sturdy cast aluminum dock cleats are sand blasted to provide a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength and durability. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. These cleats can be through bolted or lag bolted (bolts not included).

Dock Edge Cast Aluminum Dock Cleats

These sturdy cast aluminum dock cleats are sand blasted to provide a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength and durability. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. These cleats can be through bolted or lag bolted (bolts not included).

Taylor Made Dock Edging or Bumpers

Protect your boat and dock from each other with specially formulated vinyl that's both soft and durable. Each piece installs easily with screws or nails.

Taylor Made Dock Edging or Bumpers

Protect your boat and dock from each other with specially formulated vinyl that's both soft and durable. Each piece installs easily with screws or nails.

Taylor Made Dock Edging or Bumpers

Protect your boat and dock from each other with specially formulated vinyl that's both soft and durable. Each piece installs easily with screws or nails.

Taylor Made Dock Edging or Bumpers

Protect your boat and dock from each other with specially formulated vinyl that's both soft and durable. Each piece installs easily with screws or nails.

Taylor Made Dock Edging or Bumpers

Protect your boat and dock from each other with specially formulated vinyl that's both soft and durable. Each piece installs easily with screws or nails.

Taylor Made Dock Products - Dock Cushion

Protects your boat from dings, dents and scratches. Each product is UV resistant and designed for quick application. Measures 4'' thick, 6'' tall, and 49'' long.

Dock Edge Dock Bumper - Boat Shield

UV-stabilized polyethylene foam, will not chip or crack under normal usage. Unaffected by oil, gas or saltwater. UV stabilizers prevent yellowing from sunlight. Protect your investment with Dock Edge. 48'' x 2-3/4'' x 5''.

Dock Edge Dock Bumper - C Guard Profile

Marine-grade PVC will not chip or crack under normal usage. Unaffected by oil, gas, and saltwater. UV stabilizers prevent yellowing from sunlight.

Dock Edge Dock Bumper - Universal 3-Way

Marine-grade PVC, will not chip or crack under normal usage. Unaffected by oil, gas or salt water. UV stabilizers prevent yellowing from sunlight. Protect your investment with Dock Edge.

Dock Edge Dock Bumper - FlexGuard

Marine-grade PVC, will not chip or crack under normal usage. Unaffected by oil, gas or salt water. UV stabilizers prevent yellowing from sunlight. Protect your investment with Dock Edge. Mounting hardware not included. Manufacturer recommends screws not nails.

Dock Edge Dock Bumper - Boat Saver

Marine-grade PVC, will not chip or crack under normal usage. Unaffected by oil, gas or salt water. UV stabilizers prevent yellowing from sunlight. Protect your investment with Dock Edge.

Dock Edge UltraGuard Dock Bumper

Manufactured from high-quality marine grade vinyl resulting in superior strength and cushioning, the UltraGuard offers 35?? of ultimate dock protection from boat impacts. Designed with molded in ribs on the interior to ensure the UltraGuard will not collapse, while the back portion has slight radius to allow the UltraGuard to be easily mounted on pilings as well. Length: 35''. Imported.

Dock Edge ProTect Straight Dock Bumper

Even while traveling, even at low speeds, a dock can do some serious damage to the your boat. The ProTect Straight Bumper is an affordable way to add extra protection to your dock. Manufactured from MPR (Melt Processible Rubber), this heavy-duty 12'' white bumper is equipped with a tremendous amount of shock absorption qualities and will not mark or mar the hull of your boat if bumped. Length: 12''. Color: White. Imported.

Dock Edge Dock Bumper - Dock Guard Profile

Marine-grade PVC will not chip or crack under normal usage. Unaffected by oil, gas, and saltwater. UV stabilizers prevent yellowing from sunlight.

Dock Edge Dock Bumper - Dock Guard Profile

Marine-grade PVC will not chip or crack under normal usage. Unaffected by oil, gas, and saltwater. UV stabilizers prevent yellowing from sunlight.

Dock Edge DocKushion Foam Edge Bumper

The revolutionary DocKushion is the ultimate in dock protection systems! Engineered with a soft expanded polypropylene core surrounded by integral skin foam, there?s virtually no need for boat fenders with this durable bumper system on your dock. Equipped with a marine plywood backer to ensure a secure mount, the DocKushion is designed with male and a female socket that provides a seamless connect. The DocKushion sports a U.V. stabilized grey color to ensure your dock always looks clean. Length: 48''. Imported.

Dock Edge Torpedo Bumper

Attractive and functionally rugged, the Torpedo Bumper is designed to be placed on dock leg pipes over the mounting brackets to prevent damaging your watercraft from protruding bolts. Manufactured from high-quality marine grade vinyl resulting in superior strength, cushioning and a high gloss finish, each bumper measures 18?? tall with a 5?? diameter.